| AutoTune, Balance XT2, Index finger throttle, Ca, Saw blade 225-24T-1", Scarlett | |
|---|---|
| 967 17 65‑06 | |
| Engine | |
| Power output | 2.95 hp |
| Cylinder displacement | 2.79 cu.inch |
| Fuel tank volume | 33.8 fl oz |
| Fuel tank volume | 1 l |
| Fuel Consumption | 450 g/kWh |
| Maximum power speed | 9,000 rpm |
| Idling speed | 2,700 rpm |
| Maximum rpm output shaft | 9,700 rpm |
| Clutch engagement speed (±120) | 3,900 rpm |
| Electrode gap | 0.02 in |
| Ignition module air gap | 0.01 in |
| Torque, max. | 2.6 Nm |
| Torque, max. at rpm | 6,000 rpm |
| Equipment | |
| Saw blade | Scarlett 225-24 |
| Harness | Balance XT2 |
| Transmission | |
| Gear ratio | 1.29 |
| Drive gear angle | 24 ° |
| Dimensions | |
| Weight (excl. cutting equipment) | 18.1 lbs |
| Tube diameter | 1.3 in |
| Sound and noise | |
| Sound power level, guaranteed (LWA) | 116 dB(A) |
| Sound pressure level at operators ear | 99 dB(A) |
| Vibration | |
| Equivalent vibration level (ahv, eq) left handle | 2.9 m/s² |
| Equivalent vibration level (ahv, eq) right handle | 3.3 m/s² |
| Emission | |
| Exhaust emissions (CO₂ EU V) | 856 g/kWh |
| Control | |
| Connectivity | Not applicable |
| Lubricant | |
| Lubricant type (bevel gear) | Mineral grease |
New
Husqvarna 545FX AutoTune Forestry Clearing Saw
$1 329.99
Easy-to-operate clearing saw with AutoTune™ and thumb throttle
Exceptionally easily operated forestry clearing saw with high performance and unique ergonomical solutions designed for full time spacing tasks. Optimised transmission with the bevel gear angled 24 degrees simplifies directional felling in dense forests. Easily started X-torq® engine with rapid acceleration, reduced fuel consumption and emissions. Very low vibrations thanks to an effective anti-vibration of the engine, drive shaft and cutting equipment. Easy to start with Smart Start®. Delivered with Balance XT harness.


Reviews
There are no reviews yet.