BC3U-0N35-A Sugihara 14″[35cm] Light Type Pro – 3/8 Lo Pro .050 52 drive links

There are 3 types of Sugihara Guidebar – Laminated, Pro Solid and Light Type. Have a look at the second picture above in the gallery to see how these bars differ. Read on to find out what makes a Sugihara bar better than others?

Steel has different properties dependant on how it is heated then cooled. Sugihara bars may go through the process of heating and cooling up to 4 times on different parts of the bar in order to gain maximum performance. The rails need to be accurately cut and hardened but over hardening can make them brittle. The bar body needs to be stiff yet flexible. We have used a number of different chainsaw bars over the years including all the major manufacturers. Sugihara bars are the hardest wearing bars out there. Even their laminated bars will outlast rivals.

On the single piece pro and light type bars the hardness of the rails is measured at HRC 60. Compare this to Stihl at HRC 57 and Oregon at HRC 55 and it is clear why these bars last longer. They are so hard they resist most flat files when it comes to bar dressing (we recommend a diamond dressing knife which can be found here).

However, bear in mind they are more ‘thoroughbred’ in that if they are mistreated and the bar gets overheated they are more prone to chipping.